Accessories

Miller reinforced anchorage option, steel sling with a loop on each end, protective plastic casing around steel wire, suitable for use around heavy girders, for use with retractable blocks. EN795 (b).

Miller anchorage connector used for securing an intermediate attachment to an anchoroage point, quick release action, EN362.

Miller galvanised connector with keylock, connector is found on most lanyards. EN362.

The Miller Relief Step is designed to alleviate the symptoms of suspension trauma following a fall, the relief step is fitted to the harness and can be deployed for increased short term safety.

The NEW Ridgeback® Speed Ramp is designed to reduce vehicle speed and improve safety conditions in residential and commercial areas. The product's distinctive design and the angle of retro-reflective elements optimize interaction with vehicle headlamps to improve visibility. The latest high-performance polymer technology conforms to the requirements of BS EN 1436:2018 and the durability requirements of BS EN1824:2011.

Blow moulded from UV stabilised low density polyethylene. Specific twist-lock designed base to suit either permanent metal cats eye sockets or temporary base. Fitted with BS873: Part 6 Des 2 Sleeve, Suitable for use with UniBase

For use with Springback™ cylinders. Manufactured from 100% recycled PVC. Can be positioned utilising either bitumen GlueMats or with asphalt or concrete fixing bolts. Designed to accept GloPosts™ and other manufacturers cylinders.

Bolt Size - M12 x 100mm.

Bolt Size - M12 x 75mm.

The products distinctive design and the angle of retro-reflective elements optimises interaction with vehicle headlamps to improve visibility.

The products distinctive design and the angle of retro-reflective elements optimises interaction with vehicle headlamps to improve visibility.

CleanStep™ adhesive mats can be used with or without frames to provide an effective means of reducing contamination in cleanrooms and controlled environments. Constructed with 60 layers, each removable sheet has a consistent adhesive coating designed to trap particles and prevent transfer.

VORAS - Retractable Fall Arrester with polymer casing and webbing lanyard length 2.50 meters and a steel screw-locking karabiner Incorporates a protective casing and an energy absorber (45 mm) with a steel karabiner FA 50 101 17 as attachment element for harness. EN 360:2002.

Fall Arrester, Retractable fall arrest with 50 mm webbing Maximum length 2.5 meters, Incorporating a protective casing and Energy Absorber 45 mm). Minimum breaking strength > 15 kN. EN 360:2002.

7 ft. Tripod maxi For access in confined spaces Adjustable height: from 1.15 m to 2.15 m Wheelbase: from 1.08 m to 1.62 m Weight :14.3 kg Maximum Load Capacity : 500 kg under head / 250 kg on leg Conforms to : EN795:2012 type B, ATEX Directive 2014/34/EU, Machinery Directive, EN 1808 - With two mounted pulleys at the head of the Tripod in the extension of the main leg for passing a cable - Having two auxiliary eye bolts as attachment points. - Aluminum alloy cast head, legs in aluminium. - Steel support-shoes provided with rubber sole to increase friction and impart more stability. - Strength of anchorage point greater than 12 kN - Every Tripod is provided with inbuilt fixture for attaching our winches FA 60 003 20 / FA 60 003 30 / FA 60 023 20 / FA 60 023 20R. - Every Tripod is provided with Tripod Bag

Self-retracting lifeline is the ideal fall protection solution for construction, industrial, warehouse, utility, mining and confined space applications. Nearly indestructible, high-impact resistant nylon housing, stainless steel cable and screwgate karabiner. EN 362, EN360.

KALYPSO - cable, retractable fall arrester 20 m with integrated rescue winch Wire rope diametre: 4.5 mm Length: 20 mtr Weight: 9.20 kg Breaking strength: > 12 kN Connectors: Swivel and FA 50 101 17 at anchorage end, FA 50 203 20 connector with load indicator at attachment end. Conforms to: EN360:2002, EN1496:2017 class B, ATEX Directive 2014/34/EU. Approved for a user with a max. weight of 140 kg in vertical use. Olympe cable, Casing made up of high impact strength Polymer, to prevent breakage. Comes with Galvanized Steel Wire Rope of diam 4.5 mm. FA 50 225 23B at anchorage end and FA 50 203 20 at attachment end. Integrated recovery system, the device can be adapted on our TRIPOD (FA 60 001 00 or FA 60 002 00) through the Kit FA 60 001 03, as well as on MultiSafeWay (FA 60 022 00) through the plate FA 60 022 04.

Shock absorbing tool lanyard with carabiner on both ends: Designed and tested to prevent falling objects and reduce the force your body sees if a drop occurs by absorbing the energy transmitted through the tool lanyard. By reducing the shock load this design prevents the tool from pulling the user down with it protecting those above as well as those below.

ARGO - Rescue and work winch, length 20 mtr, for Tripod, MultiSafeWay & EasySafeWay To be used for raising or lowering of personnel or material into confined spaces. Minimum working load: 60 kg. Safe working load (as per EN1496): 135 kg. Maximum working load (as per Machinery Directive): 250 kg. Length : 20 mtr Galvanized cable diam : 4,8 mm Conforms to: Machinery Directive 2006/42/EC, EN 1496:2017 Class A, EN 13157:2004, ATEX Directive 2014/34/EU. Equipped with bolting fixture for robust fitting on to the Tripod.

Pull-On wrist lanyard with carabiner connection tethers tools limiting the distance of a dropped tool and reduces snag hazards.

VORAS - Retractable fall arrester with webbing lanyard Maxi length : 2.50 mtr Webbing width : 50 mm Breaking strength : > 15 kN Connector : 1 steel snap hook FA 50 202 17 Conforms to : EN360:2002 Incorporates a protective casing and an energy absorber (45 mm) with a steel karabiner FA 50 202 17 as attachment element for harness.

Metal detectable & X-ray visible, One-piece pen: no small parts, minimizes the risk of contamination, Manufactured from EU & FDA food contact approved materials, Shatter proof, and virtually unbreakable, Housing colors: blue, black, red, green, yellow, white, purple, orange and pink, Housing style: clip, no clip, lanyard Ink colours: blue, black, red, green, Ink type: standard, Sold in packs of 50

Metal detectable & X-ray visible, One-piece pen: no small parts, minimizes the risk of contamination, Manufactured from EU & FDA food contact approved materials, Shatter proof, and virtually unbreakable, Housing colors: blue, black, red, green, yellow, white, purple, orange and pink, Housing style: clip, no clip, lanyard Ink colours: blue, black, red, green, Ink type: standard, Sold in packs of 50

Length: 114.87 mm (4.52"), Pen thickness: 14.30 mm (0.56"), Pen thickness with clip: 16.91 mm (0.66"), Metal detectable & X-ray visible, Housing colour: blue, Tip type: chisel, Ink colour: blue, green, yellow, orange and pink, Sold in packs of 5, Suitable for laser engraving/pad printing

Interlocking - easy to assemble, Highly reflective, Hose/Cable Channels, Easy to order & assemble, Distinctive design, Different ramp options available.