Accessories

The filter P940 is a particle filter that protects against dust. It is equipped with a special thread for pair use only and it can be used only on the P410 Half Mask. This filter is a P3 R type and protects against toxic substances such as particles and microorganisms.​ EN 143 TYPE P3 R

Type class 1 gas filter and protects against organic gases and vapours where the boiling point is higher than 65°C. It can also be used to protect against hydrocarbons and solvents. Equipped with a special thread for pair use only, it can be used on P410 Half Mask only.

Combines with 3M™ Versaflo™ components to build a complete system. Three selectable flow rates (185 L/min, 205 L/min or 225 L/min) for maximum comfort with a steady airflow. Visual, vibratory and audible warning alarms show you low battery and low airflow. Battery charge, airflow and particulate filter loading status indicators.

The CleanSpace Battery Charger is specifically designed to re-charge the internal lithium polymer battery of the CleanSpace Power Units. The battery charger has one lead and interchangeable plugs for use in different countries.

Protects your 3M™ Versaflo™ TR-6110E and TR-6130E filters from physical damage. Holds a 3M™ Versaflo™ Spark Arrestor, TR-662 or 3M™ Versaflo™ Prefilter, TR-6600 in place for further protection. Enables 3M™ Versaflo™ Power Air Turbo to be worn through decontamination showers. Enables turbo to be worn through decontamination showers.

Powered air accessory, replacement hood with full visor.

Will charge a TR-630 standard battery or TR-632 high capacity battery in less than 4 hours. Cradle will charge only one battery at a time. Batteries may be stored on the charger, fully charged, ready for immediate use.

Powered Air accessory replacement hose.

Long run time for filters and cartridges. Provides longer run times than standard battery. Rinsable. Dunkable for easy cleaning.

CleanSpace CST TM3A2P R SL Combined Filters are suitable for protection against airborne particulates (dust, mists and fumes), organic and inorganic gases or vapours, solvents ammonia and sulphur dioxide (boiling point > 65°C).​ EN 12942:1998+A2:2008.

Comfortable due to ergonomic design. Easy to use. Designed to make cleaning easy.

CleanSpace CST Particulate Filters TM3 P3 are suitable for protection against airborne particulates (dust, mists, fumes) with a particulate filtration efficiency > 99.97%. CleanSpace CST1005 filters are compatible with the CleanSpace PRO Power Unit (CST1002) and CleanSpace ULTRA Power Unit (CST1012).

Features a flexible helix that adjusts to the appropriate length for the individual wearer.

CleanSpace CST TM3A2P R SL Combined Filters are suitable for protection against airborne particulates (dust, mists, fumes), organic gases or vapours (boiling point > 65°C). CleanSpace CST Combined Filters are compact. They clip easily and directly into the CleanSpace PRO Power Unit (CST1002) and CleanSpace ULTRA Power Unit (CST1012). No adaptor is required.

With the new patent pending Force8™ PressToCheck™ filters you can instantly check that you have the correct seal every time.

3M™ Aura™ Particulate Respirator 9332+ provides FFP3 breathing protection with a flat-fold, 3-panel design, low breathing resistance and an embossed top panel that can help reduce eyewear fogging. It features an innovative chin tab for easy adjustments, and the headbands are colour-coded for quick and easy identification. The 3M™ Cool Flow™ Valve can help reduce heat build-up in hot and humid conditions. EN 149:2001+A1:2009.

3M™ Versaflo Powered Air System TR-300+ combines performance, protection and functionality with modern, stylish, lightweight design and unrivalled comfort. It is the key to easy-to-use, versatile respiratory protection for particulate environments. 3M™ Versaflo™ Powered Air Starter Kit TR-315+ contains TR-302E+ Turbo Unit, Particle Filter, Pre-Filter, Spark Arrestors, Standard Belt, High Capacity Battery, Battery Charger Kit and length adjusting Breathing Tube. Simply add your 3M™ Versaflo™ Headtop for complete respiratory protection.

3-ply reusable fabric mask with anti-microbial finish. Kills 99.9% of bacteria and controls numerous odour-causing microorganisms that can accumulate in the fibres from skin contact and laundering. Inner cotton fabric for all day comfort. Elasticated ear loops with adjuster for the perfect fit.

The P956 is an A2P3 type combined filter, equipped with a standard DIN threaded connection conforming to EN 148-1 and can be used on full face masks with the same connection. Classified as a class 2 filter for gases and class 3 for particles, it can be used to protect against harmful substances, solvents, toxic particles and micro-organisms.

Easy to install on Powered Air Respirator Easy determination of charge level Available with UK or EU plugs Simple to install 3M™ Powered Air Respirator Batteries are for use with certain 3M™ Powered Air Respirators 3M™ Powered Air Respirator Batteries are available in a variety of options such as standard capacity, high capacity or intrinsically safe.

Easy to use Replacement Part Visual LED indicator to confirm charge status CE approved when used as part of a complete system Charge your 3M™ Powered Air Respirators with Battery Chargers for 3M™ Powered Air Respirators. Ensure your 3M™ Powered Air Respirator is ready to use with Battery Chargers for 3M™ Powered Air Respirators. Our chargers feature a visual LED to indicate charging status and are availlable in single or multiple stations.

This combination gas and particle filter protects from organic and inorganic acid gases and vapors, sulfur dioxide, ammonia, and its derivatives. Classified as a class 1 filter for gases and class 3 for particles it protects against harmful substances, solvents, toxic particles, and micro-organisms. This filter is compatible with half masks P420, P430, P421, P431 and Full Face masks model P500.​ EN 14387 TYPE ABEK CLASS1, EN 14387 TYPE P3 R.

P921 is an ABEK type class 1 filter and it protects against organic and inorganic acid gases and vapors, sulphur dioxide, ammonia and its derivatives where the boiling point is higher than 65°C. The special bayonet system ensures a safer connection between the mask and the filter while the twin filters offer improved comfort and balance. This filter is compatible with the P500 Full Face masks and the P420, P430, P421, P431 Half Masks. EN 14387 TYPE ABEK CLASS 1

The filter P941 is a particle filter that protects against dust. It is a P3 R type and protects against toxic substances such as particles and microorganisms. This filter is compatible with the P500 Full Face masks and the P420, P430, P421, and P431 Half Masks. ​EN 143 TYPE P3.